Wanhao Duplicator D12/230 - Dual Extruder

D12-230-DUAL

Nieuw product

Dual colour printing for everyone! Now you can print with two colours at almost the same price as most single colour printers.

€ 299,00 incl. BTW

In Verlanglijst

Op werkdagen voor 17:00 uur besteld, morgen gratis bezorgd!

Datasheet

3D PrinterFDM
3D PrinterMulti Material/Color
Filament Diameter1.75
Filament TypenPLA, ABS, PET, TPE
Filament TypenSupport
Filament TypenPETG
Filament TypenWOOD
Third Party Filamentsja

Meer informatie

Wanhao D12

Wanhao is back again with an exemptional price performance ratio with their new 3D-Printer.

The main features of this new printer are:

  • Two colour printing
  • Dual extruders to one hotend
  • Good build volume 230x230x250mm
  • 5” Touch screen with preview function
  • WIFI support
  • Filament sensor
  • Power failure resume printing
  • Quit TMC2209 stepper drivers
  • Adjustable Belt Tensioner

Built around a frame with high quality aluminium profiles this sturdy machine achieves stunning results.

You can print with two different colours or use support material like PVA thanks to the design with double extruders feeding to one hotend.

Easier than normal dual extrusion as you only need to level one nozzle. Or just convenient to have your two favourite filaments loaded booth at the same time ready for printing.

Nice 5” colour display with touch function. Smart and intuitive menu system where you can preview the model being printed.

WIFI support so you can communicate direct with your printer without cables.

Magnetic spring plate makes it easy to remove the printer models after finished print.

New developed MK12 extruder with efficient cooling system for the nozzle. Improved high-torgue feeding mechanism. Small Bowden tube feeding the hotend with less weight on the moving part, this means that you can improve print speeds.

Easy to adjut the X-Axis belt so you can fine tune your print result to get it even more accurate.

Easy levelling with larger levelling nuts that are easy to adjust.

Filament run out sensor with automatic resume

Very easy to assemble even for a novice. Units comes pre-assembled; all you need to do is to fasten a few screws. You will be printing in no-time.

Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12 Wanhao D12

Primary AttributesPLA Printer, Entry Level Printer. Fully Assembled.
SoftwareCURA include, works with Simplify 3D
Extruder SystemMK12 Single/ Double together
Material SupportPLA, PETG, any filaments melt =<260 C
Max Printable Area230*230*250mm
Filament Diameter1.75mm
Max Printing Speed150mm/s
Case MaterialAluminum Case
With Insulated Cover?Insulated tent available, to be purchased separated.
Extruder Quantity2 Dual
AccuracyMotor Accuracy
Net Weight(kg)8.56kg
Gross Weight(kg)11kg
Bed Leveling5 points manual leveling
Machine size(cm)33*52*50cm
Packing size(cm)53.5*48*27.5cm
Plateform HolderSteel Frame Holder
Rail Locking SystemSteel Bolt Locking Frame
Layer Thickness100 micron- 400 micron
PlatformAluminium Platform w/Heating
Resume Printing?Can resume printing after power failure
LCD DisplayEnglish/Chinese
Power Supply UnitInside 110 AND 250V(optional), 50/60Hz, 4.0A (input), and takes standard IEC cable
Typical Application• A perfect printer for educators who intend to use the printers in technical educatioin.
• Great printer for DIY hobbist.

30 meer producten uit categorie

Voordelen
WebwinkelKeur Webwinkel Keurmerk


vink   Naast nationale ook Europese keurmerk

vink   Snelle reactietijd op e-mail; 24/7

vink   Gratis verzending vanaf € 50,- (NL)

vink   Deskundig Advies

vink   Snelle levering

vink   Kortingsvoucher na beoordeling


Bekeken producten

Aanbiedingen

  

Geef een cadeau kaart