Warning: Last items in stock!
Availability date: 05/01/2018
|Third Party Filaments||ja|
What do you get when you upgrade one of 3D Hubs’ “Best of Prosumer 2018” 3D printers, the Raise3D N2 Dual? The answer is the Raise3D Pro 2. With a renewed build plate system, automatic integration of the filament run-out sensor and more, this smart and reliable prosumer 3D printer is the perfect choice when you look for a big build volume, reliability and print quality. With its two printheads you can produce amazing prints or combine a variation of materials without problems.
The Generation motion control
This Raise3D Pro 2 has gotten an improved motion control system, which adds to the enhancement of your controls and resolution of your prints. The upgrade also creates a better thermal process of your prints.
The renewed build plate system
Raise3D did not alter the build volume (305 x 305 x 300mm) nor did they change the automatic factory calibration before packing. They did however renew the build plate, and added an enhanced warping protection system. The new silicone heating bed divides the heating of the printbed even better. With the better layer adhesion and longer life span, the renewed build plate offers a higher success rate. Last, the 4+9 attach system adds to the stabilization of your print bed.
The Raise3D Pro 2 has some interesting new features in the printhead. With the nozzle, going up to 300°C, and an improved hot-end isolation you can print a big variety of materials, going from PLA and ABS to Nylon and carbon reinforced materials. The integrated filament run-out sensor notifies you when you run out of filament, so that you can print without worries. The layer resolution with this printhead has remained the same, going from 10 to 250 microns.
Advanced dual extrusion
Next to the renewed printhead, the Raise3D Pro 2 has the electronic driven lifting system. Due to this system, the printhead retracts automatically when it is not being used. With a light speed retraction (less than one second switching time) and a lifting distance of 1.5 mm, you will not have the risk of your second head touching your print during the process. Raise3D has extensively tested this, and with its high repeatability you can print the most intricate projects.
Build-in camera and air-filter
Next to these things, the Raise3D Pro 2 has a build-in camera that allows you to monitor your prints from a distance. The build-in air filter cleans up to 91% of the air particles from printing.
Next to the novelties included, Raise3D has also optimized some old features.
Interactive controls, both far and near
Thanks to the 7-inch touchscreen, which is integrated in the Raise3D Pro 2, your user experience grows. Via the touchscreen, you can easily manage basic 3D printing settings, to optimize your results. Because of the WiFi/Ethernet connection, you can also adapt these settings from your computer. The user experience, with visual interface and rapid reviewing function, allows you to see rapidly the progress of your prints.
Continue printing, even without power
Off course you need power to print with the Raise3D Pro 2 3D printer. But thanks to the build in li-on battery, this printer will continue printing during a power black-out or power loss. This power loss protection system optimizes the usage of your 3D printer and protects you against unexpected power losses.
Powerful slicing software
With ideaMaker, Raise3D has created a powerful slicing software that is compatible with a big variation of FDM 3D printers. This fast working software allows you to do the basic slicing items, but also lets you repair your print. The optimized interface creates an extra user friendliness, among others the automatic generation of support.
Included in the box:
- Glass with protective foam
- Nozzle cleaning kit
- Filament holder
- Build plate clips
- Fan cover
- Power Cable
- Hex Wrenches (3mm – 2.5mm – 2mm – 1.5mm)
- USB Stick
- Fuse (15A – 10 A)
- Filament guide tube
- Build surface
- Other accessories (spare parts)
|Print technology:||FFF - Fused-Filament-Fabrication (FDM)|
|Maximum build volume:||305 x 305 x 300mm|
|Dimensions of the 3D printer:||616×590×755 mm|
|Nozzle diameter:||0.2/ 0.4/ 0.6/ 0.8mm|
|Nozzle temperature:||Max. 300 ºC|
|Layer Resolution:||10 - 250 micron|
|Print speed:||30 - 150 mm/s|
|Positioning precision of the axes:||x: 0.78125 / y: 0.78125 / z: 0.078125 micron|
|Printable materials:||Nylon, PLA, ABS, PC, TPU 95A, PP, PVA, PETG, Filled, PLA, Filled Nylon|
|Heated printbed:||Max. 110°C|
|Stand alone printing via SD?:||No|
|Stand alone printing via USB?:||Yes|
|Stand alone printing via WiFi:||Yes|
|LCD Screen:||7 inch Touch Screen|
|File format:||STL, OBJ|
|Supporting OS:||WINDOWS/ IOS/ LINUX|
|Open / Closed Source?:||Open Source|
This is why you should use EasyPrint!...
The Raise3D Pro 2 is the perfect...
De waardering van www.3dware.nl bij Webwinkel Keurmerk Klantbeoordelingen is 9.3/10 gebaseerd op 301 reviews.